 EPLEXOR® 150 N
|
The EPLEXOR® 150 N combines the dynamic mechanic thermal analysis with the dynamic material testing for the determination of the absolute values of the E modulus. The EPLEXOR® 150 N is available in two different designs:
- EPLEXOR® 150 N High End and
-
EPLEXOR® 150
N Basic
Further fields of application are:
-
DMA/DMTA/DMTS
-
Dynamic component testing
-
Durability tests
-
Analysis of the visco-elastic material properties
-
Dynamic fatigue testing
-
Relaxation and retardation
- creep testing –
(optional) -
Tests in liquids (optional)
-
Tests among UV light (optional)
-
Tests in humid atmosphere (optional)
-
Prediction of application properties
-
Materials research
-
Impact tests
The upgradable Automatic Sample Supply System (ASSS) with a sample dimension measurement station guarantees a best possible sample capacity during investigations in the entire temperature range of -150 °C to 500 °C (option).
CHARACTERISTICS:
The only DMTS system with two independent drives (only EPLEXOR® 150 N High End) for the static and dynamic load.
Contrary to the High End version the EPLEXOR® 150 N Basic system is equipped with one drive for the dynamic and static load and is therefore particularly inexpensive.
The EPLEXOR® 150 provides a bigger reserve of force compared to the EPLEXOR® 100 N. Dynamic drive up to 150 N.
Through the higher force range it is especially applicable for curable plastics, composites or elastomers.
|
-
Absolute values of deformation, force, initial sample length L0 and temperature.
-
Determination of the following material properties: E’, E”, G’, G”, η”, η’, tan delta
(depends on the used sample holder). -
Storage of the raw data.
-
Dynamic testing of polymers, elastomers, caoutchoucs, rubbers, biological materials, glasses, ceramics, metals, foils, fibres, tyre cords, resins, adhesives, prepregs, composites, lacquers, coatings, food-stuffs, pharmaceuticals and much more.
-
Changeable force transducers.
-
Changeable sample holders.
-
Automatic Sample Supply System (ASSS) for tension, compression and bending samples within the entire temperature range, including sample dimension determination (option).
-
Simultaneous DMA/DMTS and TMA application.
-
Control and measurement analysis, alternatively in the procedure of FFT (Fast Fourier Transformation), Least Square Fit or hysteresis.
-
Time, temperature, superposition (mastercurves) - WLF, Arrhenius, numerical methods.
-
Extensive software package (data and curve analysis), spline functions, 3D-plots and Cole-Cole diagrams.
|
| Specifications |
| EPLEXOR® 150
N High End |
| Force range |
Dyn. strain |
Stat. strain |
Frequency range |
Temperature |
| ±150
N (300 N)** |
±1.5 mm (3
mm)* |
up to 35 mm |
0.01 Hz - 100
Hz |
RT to 500 °C |
| |
|
|
|
|
| Optional |
Optional |
|
Optional |
Optional |
| static
1500 N |
---- |
|
0.001 Hz - 100
Hz 0.001 Hz - 200 Hz |
-150 °C to
500 °C |
| *The max. elongation depends on the sample, sample holder and frequency. |
**Peak force |
| EPLEXOR® 150 N Basic |
| Force range |
Dyn. strain |
Stat. strain |
Frequency range |
Temperature |
| ±150
N** |
±1.5 mm* |
up to 3 mm |
0.01 Hz - 100
Hz |
RT to 500 °C |
| |
|
|
|
|
| Optional |
Optional |
|
Optional |
Optional |
| ----- |
---- |
|
0.01 Hz - 200
Hz |
-150 °C to
500 °C |
| *The max. elongation depends on the sample, sample holder and frequency. |
**Peak force |
|
|
