EPLEXOR® HT
|
The EPLEXOR® HT for high temperatures up to 1500 °C combines the dynamic mechanic thermal analysis with the dynamic material testing for the determination of the absolute values of the E modulus. The EPLEXOR® HT is available in two different designs
:
- EPLEXOR® 150 N HT (1000 °C or 1500 °C)
- EPLEXOR® 500 N HT (1000 °C or 1500 °C)
Further fields of application are:
- DMA/DMTA/DMTS
- Dynamic component testing
- Durability tests
- Analysis of the visco-elastic material properties
- Dynamic fatigue testing
- Relaxation and retardation
- creep testing -
(optional)
- Tests in liquids (optional)
- Tests among UV light (optional)
- Tests in humid atmosphere (optional)
- Prediction of application properties
- Materials research
- Impact tests
The upgradable Automatic Sample Supply System (ASSS) with a sample dimension measurement station guarantees a best possible sample capacity during investigations in the entire temperature range of -150 °C to 500 °C (option).
CHARACTERISTICS:
The only DMTS system with two independent drives for the static and dynamic load. The frame was especially developed for the absorption of high temperature oven up to 1000 °C or 1500 °C. Optionally, it exists the choice to measure in a double chamber operation in a low temperature range from -150 °C up to 500 °C.
The field of applications are glasses, ceramics, high temperature composites, metals for the high temperature range as well as polymers and elastomers in the low temperature range.
Thus, the EPLEXOR® HT is a real universal system.
|
- Absolute values of deformation, force, initial sample length L0 and temperature.
- Determination of the following material properties: E’, E”, G’, G”, η”, η’, tan delta
(depends on the used sample holder).
- Storage of the raw data.
- Dynamic testing of polymers, elastomers, caoutchoucs, rubbers, biological materials, glasses, ceramics, metals, foils, fibres, tyre cords, resins, adhesives, prepregs, composites, lacquers, coatings, food-stuffs, pharmaceuticals and much more.
- Changeable force transducers.
- Changeable sample holders.
- Automatic Sample Supply System (ASSS) for tension, compression and bending samples within the entire temperature range, including sample dimension determination (option).
- Simultaneous DMA/DMTS and TMA application.
- Control and measurement analysis, alternatively in the procedure of FFT (Fast Fourier Transformation), Least Square Fit or hysteresis.
- Time, temperature, superposition (mastercurves) - WLF, Arrhenius, numerical methods.
- Extensive software package (data and curve analysis), spline functions, 3D-plots and Cole-Cole diagrams.
|
| Specifications
|
| EPLEXOR® 150 N HT |
| Force range |
Dyn. strain |
Stat. strain |
Frequency range |
Temperature |
| ±150 N (300 N)** |
±1.5 mm (3 mm)** |
up to 35 mm |
0.01 Hz - 100 Hz |
RT to 1000 °C |
| |
|
|
|
|
| Optional |
Optional |
|
Optional |
Optional |
| static 1500 N |
---- |
|
0.001 Hz - 100 Hz 0.001 Hz - 200 Hz |
RT to 1500 °C
-150 °C to 500 °C |
| *The max. elongation depends on the sample, sample holder and frequency. |
**Peak force |
| EPLEXOR® 500 N HT |
| Force range |
Dyn. strain |
Stat. strain |
Frequency range |
Temperature |
| ±500 N (1000 N)** |
±1.5 mm (3 mm)* |
up to 35 mm |
0.01 Hz - 100 Hz |
RT to 1000 °C |
| |
|
|
|
|
| Optional |
Optional |
|
Optional |
Optional |
| static 1500 N |
|
|
0.001 Hz - 200 Hz |
RT to 1500 °C
-150 °C to 500 °C |
| *The max. elongation depends on the sample, sample holder and frequency. |
**Peak force |
|
|
